Purebble Installation & Care
Make sure your shower and your Purebble model are a good fit. Start with the connection check, then use the illustrated manufacturer instructions for your model.
Purebble II · U.S. kit
A wider spray for everyday showering. The U.S. manual lists the head, stainless-steel hose, mount holder and sealing tape.
Minimum requirements: 0.035 MPa (0.35 bar) water pressure and 6.5 L/min flow, as specified in the U.S. manual.
Open the illustrated II U.S. manual (PDF)
Purebble PRO · focused rinse
A convergent stream for controlled rinsing. A hose and shower holder are not included with Purebble PRO. The head connects to a compatible G1/2 shower hose. Use compatible existing parts or purchase a hose and holder separately. Ask us about compatibility before ordering.
Water supply: Aura Tec's general guidance specifies at least 0.035 MPa (0.35 bar) and 7 L/min with the head attached. Follow any model-specific requirements supplied with your unit.
Open the convergent-model manual (PDF)Check your connection before ordering
- Look at the hose connection. The shower head uses a G1/2 screw connection. Confirm the thread and seal on your existing hose; a nominal “half-inch” label alone does not confirm every fitting.
- Replacing a fixed shower head? A handheld setup needs a compatible hose and mount holder between the shower arm and the head. Follow the kit's illustrated installation instructions.
- Check unusual fittings. Integrated head-and-hose units, proprietary fittings and some shower systems may need different parts. Japanese-brand adapters are not universal U.S. adapters.
- Check the flow. Weak flow, blocked filters or mineral buildup can affect microbubble generation. Contact us before purchasing if your existing shower has very low flow.
Ask us to check your model and setup. Include the model you are considering and the make or connection details of your current shower. We can help confirm the required parts.
Install with care
Turn the water off. Fit the holder, hose and head as shown in the instructions for your kit. Keep the seals in place, avoid overtightening plastic threads, and check for leaks with a gentle flow before use.
Check water temperature before every shower. The manual's maximum product temperature is a material limit, not a recommended bathing temperature.
Keep the water flowing
Clean the inlet filter and spray panel using the method in your manual. Purebble does not soften water or remove chlorine, so mineral buildup may still need attention.
Water draining from the air inlet after shutoff is normal. If it leaks while running, check for blockage and adequate flow, then contact us if the issue continues.
Choose with confidence
Compare II & PRO · Shipping details · Return eligibility & refunds
Reference: Aura Tec compatibility and care FAQ. Manuals and regional packages can differ; use the instructions supplied with your model.